skip to Main Content

Solenoid - Direct Operated

Continental Hydraulics offers in both NFPA D03 and D05 mounting patterns, Direct operated Solenoid valves. Suitable for operating in systems that require directional control over the hydraulic fluids in circuits with flows up to 38 GPM.

VSD03L direct operated solenoid valve product; white background

Solenoid Operated Directional Valve

With IO-Link interface, these Valves effectively integrates the valve in a digital communication system driven by PLC, and allows collecting operational data and environmental information for predictive diagnostics.  The on-board electronics allow the valve to be controlled by a PLC with a low-power digital signal.

  • There are several functions available, including fast switch, energy saving and soft-shift.
  • The valve is available in 3- or 4-way design, with 2 or 3 positions and a wide range of spools
  • The valve is available with DC solenoids
VSD03M direct operated solenoid valve products; white background

Standard Performance Spool - In Body Design

The traditional high-performance directional control, these valves conform to NFPA D03 and ISO 4401 mounting standards. They are available in both 3 way and 4 way styles. All versions are available in 2 position spring offset, 2 position detent, 2 position spring centered and 3 position spring centered versions.

  • A wide range of spools are available
  • Standard and CSA approved versions are available.
  • Pressures to 5000 PSI and Flows to 20 GPM

Solenoid Operated Directional Soft-Shift Valves

These Soft-Shift valves provides a slow spool movement; slower than that of a standard directional valve. This results in reduction or elimination of hydraulic system shock produced by the spool movement and high flow rates.

  • Conform to NFPA D03 and D05,  ISO 4401 mounting standards.
  • The valve is available in 3- or 4-way design, with 2 or 3 positions and a wide range of spools
  • The valve is available with DC solenoids

Environmentally Durable

These valves are supplied with a ZINC-NICKEL PLATING making them the perfect choice for mobile and environmental applications that require better protection.

Direct acting, subplate mounted directional control valve, with mounting surface according to NFPA D03 ISO 4401-03. The valve body is made with high strength iron castings with internal passages designed to minimize pressure drop.

  • This valve is designed using DC voltage core tubes.
  • The DC core tubes accept DIN 43650, AMP junior, DEUTSCH DT04-2P coil connections.
  • D03 pattern P, A & B ports to 5000 PSI, T port to 3000 PSI and nominal flows to 20 GPM
VSD05M direct operated solenoid valve products; white background

Solenoid Operated Directional Valves

The traditional high-performance directional control, these valves conform to NFPA D05 and ISO 4401 mounting standards. They are available in both 3 way and 4 way styles. All versions are available in 2 position spring offset, 2 position detent, 2 position spring centered and 3 position spring centered versions.

  • A wide range of spools are available
  • Standard and CSA approved versions are available.
  • Pressures to 4600 PSI and Flows to 38 GPM
VSNG10 direct operated solenoid valve products; white background

Low Power Consumption - High Performance

The valve is suitable for special applications, guaranteed by the reduced solenoid dimensions. These valves are supplied with a ZINC-NICKEL PLATING making them the perfect choice for mobile and environmental applications that require better protection.

Direct acting, subplate mounted directional control valve, with mounting surface according to NFPA D05 ISO 4401-05. The valve body is made with high strength iron castings with internal passages designed to minimize pressure drop.

  • This valve is designed using DC voltage core tubes.
  • The DC core tubes accept DIN 43650, AMP junior, DEUTSCH DT04-2P coil connections.
  • D05 pattern P, A & B ports to 4600PSI, T port to 3000 PSI and nominal flows to 33 GPM
Back To Top